Вот что мне GG когда создал и записал * Once properly flashed boot console Xell. To retrieve CpuKey you can: - Write by hand in the program field CPUKEY - Connect console to Lan and click IP - Cpukey. - Try USB - Dumper button and follow the instructions - If you have installed flasher you can read it clicking Flasher - Cpukey. * If you have any problem flashing , try another nandpro version in Options. ) Провод отпаял, бокс запускается чип нет и черный экран.
Так ты не записал xell, если хбокс запускается. Смотри внимательное, когда нажимаешь на запись кселла.
Все делаю по инструкции, но как только пробую записать пишет тоже самое * Once properly flashed boot console Xell. To retrieve CpuKey you can: - Write by hand in the program field CPUKEY - Connect console to Lan and click IP - Cpukey. - Try USB - Dumper button and follow the instructions - If you have installed flasher you can read it clicking Flasher - Cpukey. * If you have any problem flashing , try another nandpro version in Options. )
* To Start process is necessary your Nand Dump: - If you already have it load your dump. - If you already have Fsd v3 connect console to Lan and click IP-Read. - If you have not Fsd but Xell try using Nand Dumper-Usb button and follow the process. - If the console is Retail ( Original Dash ) install and select your Nand reader Click Flasher-Read. * If you already have FSD v3 and you want to update your Dash select Lan or Usb Mode and try AutoUpdate-Dash Чтение Nand, подожите........ Nand detected , Device: G: G:: device safely ejected Дамп считан, чтение следующего G:: device safely ejected Nand считан без различий. ОБНАРУЖЕНИЕ NAND: "nand\nanddump.bin" ------------------------------------------------------------------------------------------------------------- NandPro v3.0a by Tiros Could not open Virtual Nand Device File: nand\nanddump.bin Can not continue ------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------- NandPro v2.0e by Tiros Could not open Virtual Nand Device File: nand\nanddump.bin Can not continue ------------------------------------------------------------------------------------------------------------- Unecc dump detected Checking ECC-CheckSum... Wait ПРОВЕРКА SMC_CONFIG Smc Config найден: 0x02FF0000 Reading Temperatures...: Reset Parental Code: LLDX ПРОВЕРКА ДАННЫХ NAND ID: b3ff256a Found SMC (version 2.5) : 00000800 - 00004000 SMC Patch found at offset 0x13b9 Nand NO RETAIL (Exploited) Found Keyvault : 00004000 - 00008000 Looking for Cpukey in Local Database. Not Found Looking for Cpukey in same folder cpukey.txt.Not Found Looking for Cpukey on Nand.Not Found Found CB_A (build 918 : 00008000 - 00009ac0 * Cb_b >=13181 (winbond?) Found CB_B (build 13182) : 00009ac0 - 00014c40 Found CD (build 8453) : 00014c40 - 0001ac40 Nand valida ПРОВЕРКА МОДЕЛИ КОНСОЛИ Проверка пригодности... Модель : Corona4g CB_A_9188 GLITCHEABLE CD_8453 Not JTAGABLE or Jtaged Size: 64 Reloaded_Glitch_c.bin ------------------------------------------------------------------------------------------------------------- ‘Є®ЇЁа®ў ® д ©«®ў: 1. ------------------------------------------------------------------------------------------------------------- FileSystems: FileSystem Active:31 offset:0x23C0000 FileSystem Last:31 offset:0x23C0000 Block Size File 0x00000800 0x00003800 SMC_2.5.bin 0x00004000 0x00004000 Keyvault.bin 0x00008000 0x00001AC0 CB_A_9188.bin 0x00009AC0 0x0000B180 CB_B_13182.bin 0x00014C40 0x00006000 CD_8453.bin 0x0190BA2E 0x00014000 aac.xexp1 0x0191F07C 0x00061000 bootanim.xex 0x01980000 0x0001D000 hud.xex 0x0199F07C 0x00014000 huduiskin.xex 0x019B26C9 0x00008000 mfgbootlauncher.xex 0x019BA2E8 0x0000F000 nomni.xexp1 0x019C9B26 0x00005000 nomnifwm.xexp1 0x019D1745 0x00002000 nomnifwk.xexp1 0x019D5555 0x00251000 xam.xex 0x01C1745D 0x00017000 ximecore.xex 0x01C2E8BA 0x00002800 ximedic.xexp1 0x0182E8BA 0x0006CA80 sysupdate.xexp1 0x01C7C1F0 0x00018000 xenonclatin.xttp1 0x01C9364D 0x00007000 xenonjklatin.xttp1 0x01CAE8BA 0x005B2000 dash.xex 0x022364D9 0x0000A000 deviceselector.xex 0x018FC1F0 0x00000A00 crl.bin 0x00A03E0F 0x0011B000 xenonclatin.xtt 0x02241F07 0x0001B000 gamerprofile.xex 0x00B2E8BA 0x001A8000 xenonjklatin.xtt 0x0225D174 0x0000C000 minimediaplayer.xex 0x02268BA2 0x0001A000 signin.xex 0x00CE8BA2 0x00090000 ximedic.xex 0x02283E0F 0x00007000 updater.xex 0x0229F07C 0x00004000 extended.bin 0x018F07C1 0x00007090 dae.bin 0x022A6C9B 0x00000400 secdata.bin 0x00DBE0F8 0x00004000 fcrt.bin 0x0228BA2E 0x0000B000 vk.xex ------------------------------------------------------------------------------------------------------------- * CpuKey unknown. If you know it write in Cpukey field or use any of methods to retrieve it. * If you havent got it yet choose Xell model and Click NandXell-Create ------------------------------------------------------------------------------------------------------------- Создание Nand Xell. Подождите ... ! Warning: can't patch this Corona type SMC! New Cb Detected Using prepathed Cbb Using RIP CB_A Добавлено к NandXell 0x00000000..0x000001FF (0x00000200 bytes) Header 0x00000200..0x000007FF (0x00000600 bytes) Padding 0x00000800..0x00003FFF (0x00003800 bytes) SMC 0x00004000..0x00007FFF (0x00004000 bytes) Keyvault 0x00008000..0x00009ABF (0x00001AC0 bytes) CB_A 9188 0x00009AC0..0x00014C3F (0x0000B180 bytes) CB_B 13182 0x00014C40..0x0001AC3F (0x00006000 bytes) CD 8453 0x0001AC40..0x0001FFFF (0x000053C0 bytes) Padding Создание ECC. Подождите...Adding Xell part Xell: Reloaded (tuxuser corona) OK Xell Nand создан. Теперь вы можете его прошить (output\nandxell.bin) ------------------------------------------------------------------------------------------------------------- * If created click on NandXell-Flash to write Nandxell (Ecc) on your Xbox. ------------------------------------------------------------------------------------------------------------- Подождите........ Flashing NandXell to Device MMC-SD = G: G:: device safely ejected ------------------------------------------------------------------------------------------------------------- * Once properly flashed boot console Xell. To retrieve CpuKey you can: - Write by hand in the program field CPUKEY - Connect console to Lan and click IP - Cpukey. - Try USB - Dumper button and follow the instructions - If you have installed flasher you can read it clicking Flasher - Cpukey. * If you have any problem flashing , try another nandpro version in Options. ) Вот весь лог от начала до конца, мне кажется у меня нет Xell-а на корону 4G. Такое возможно?
@ЯРЫЙ, Так с логом нормально, а ретейл грузится, это как так? @imp-Dimas, после этой записи кселла, поведение чипа и консоли изменилось?
Да именно так, стартует и больше ничего черный экран... думал через AV проверить, но оказалось проблемой найти кабель, да и дома нет не тюльпанов ни джека чтоб собрать
По HDMI, фото пайки есть выше уже несколько раз проверил все правильно, чип просто горит красным и все... Сегодня отнес в СЦ проверили мать, и чип снимали и что только не делали, вердикт - материнка полностью исправна а вот почему нет видео так и не узнали, перепробовали кучу проводов разных и переходники VGA и AV картинки так и нет и звука тоже..
Ну тогда это брак чипа, на асе v3 это не редкость. А фоты я просил, чтобы посмотреть актуальное состояние.
Ты же залил xell, это программа для получения ключа. Чтобы откатить всё назад, ты должен залить оригинал.
Стоп. На картинке провод из под проц идёт в точку D. Вопрос - какого хрена? Upd: извиняюсь, показалось