Greetings, Nowadays, there is a production of Xbox 360 new CPU for both Jasper and even Zephyr boards, I bought a CPU and it turned out this CPU has 0 fuses and cant possibly launch a dashboard using normal methods. I found a guide here made by @RichY and he uploaded a file . I found this awesome guide, http://www.hackfaq.net/main/zero_cpu/#comment-248454 but Im afraid I couldnt swap SMC for a jasper xbox and I could only boot ECC not even Xell-Reloaded. Basically Im stuck and I cant do a dime. If someone have any info on this, please share! Thanks.
I tried xebuild to build Dev image, here is what i got ---- { Image Build Mode } ---- building devkit image ***** ERROR: BL magic check CB for type 12 failed! **** could not read cbb_6752.bin (-1) **** ******* ERROR: critical bootloader files are missing, cannot proceed!
Im simply looking for Devkit patches for Xebuild, somehow Ricky managed to build a devkit image using xebuild.
I maybe be able to boot retails Dash 1888v but I cant find it, if someone have it please share it. I need a retail image that doesnt check for LDV, the only one is the first dash XD and ofc the first Dev image.
I made this image through fusion with 0 CPU key, if the CPU key has any other value than zeros, the console wont boot. Then you have to prepare a usb stick with "Fusion 1.09" files, simply copy the content of "bootdisk" into usb formatted as fat32. After that, you will be greeted with glorified boot animation (Fusion's) and the console then the console outputs nothing, BUT you can access its network through Xbox 360 neighborhood; of course you have to connect Ethernet cable to the same router/access point of your computer then you can find the IP address of your xbox in your router Lan page. You can pretty much run any dev-kit recovery image and burn the fuses if you want of course, but you need a bigger nand, and I tried to to solder a bigger nand but it didnt work, probably there are missing resistors, I dont to waste time on figuring out how to upgrade nand size. Here is all the files you need, but make sure you swap SMC matching your board. Thanks for your replies. https://www.mediafire.com/file/asi5dh9lf3vzf1a/CPU_0_Phat_BOAD_Image_as_Dev-Kit.rar/file
I upgraded the nand, ran XDKRecoveryXenon7978.exe selected flash 6719, then it ran and copied the files, gave me an error S1040, ran it again and now I have this Im having an issue with this KV, as it treats the drive as slim! Got fixed however with nandpatch ! Notice also the LDV for CB, fuse line 2 & at fuse line 7 both zeros and never burnt. Also, Im not sure about fuse1 for devkit, does it look like this? Im running a dev dashboard now :D, at least I get this far https://imgur.com/a/OMXLC3N#UpOxJkQ
